Tumbler Wrap Designer

Make a wrap for your straight or tapered cup.

Your files stay on this device.
No upload. No sign-up.

1 Measure your cup

Starting point

Examples, not manufacturer templates. Measure around the top and bottom of the straight-sided print surface.

Units

Top circumference mmBottom circumference mm

Vertical cup height mm

Measure straight up and down, not along the sloping side. The wrap follows the actual slant automatically.

Print edges & alignment

Unprinted top mmUnprinted bottom mm

Seam gap mmSafe inset mm

The seam gap is measured at the wider edge and narrows with the cup. It is unprinted space, not overlap.

Pattern start

Top alignment mmBottom alignment mm

Leave alignment at zero unless a test print shows a pattern offset. Different values intentionally tilt the pattern.

Mirror artwork for transfer

2 Add your design

Or drop PNG, JPG, or WebP files on the preview. Up to 25 MB and 24 million pixels per image.

Wrap background

3 Size & place

Horizontal positions use the wider circumference. Vertical positions use cup height. The curved print shape is calculated for you.

Clears this design and its saved settings after confirmation.

Show guides

Preparing your example design…

Custom dimensions

Drag a layer to move it. Arrow keys move it 1 mm; Shift moves it 10 mm.

Safe areaOutside the curved wrap stays transparent. Guides are not exported.

Check the curve. Then download.

Your output dimensions appear here.

File typeResolution

Custom dimensions — verify with your printer. RGB output, not a certified manufacturer template.

A wrap that follows the taper

Measure the surface. Enter top and bottom circumferences and vertical height. Equal circumferences create a straight rectangular wrap.
Make the design yours. Edit each image and text layer. The curved layout preserves the slant of the cup rather than stretching it into a rectangle.
Test the fit. Download the design check sheet and print its 100 mm ruler at actual size. Confirm the wrap on your cup before producing a batch.

Before you print

Does this fit every tumbler?

No. This tool models a straight-sided cylinder or a circular, evenly tapered cup. Rounded shoulders, changing tapers, handles and irregular shapes need a manufacturer-specific template. Do not use this calculated wrap as a substitute for that template.

Why is the flat artwork curved?

A tapered cup unfolds into part of a ring. The top and bottom arc lengths come from your measurements, and their radial separation follows the sloping surface. This is a geometric development, not a photograph of the product preview.

What is in the downloaded files?

PNG has a transparent area outside the wrap. SVG and PDF preserve outlined text and geometric artwork; photos remain raster images mapped into the curve. No selection boxes or preview shading are exported. Output is RGB, not PDF/X or a machine-specific print format.

What is saved locally?

Settings and text are remembered on this device; uploaded images are not automatically stored. Save project downloads a ZIP with the images for later editing. Your design files are never uploaded. Opening the website still makes ordinary page requests.

Will a higher resolution improve a small photo?

No. Export resolution controls output pixels, not the detail in your original. Low-resolution warnings use the original image and crop size. PNG pixel dimensions correspond to the selected PPI at the displayed physical size; a density metadata tag is not promised.